Magnet Chassis Saver Gloss Black Rust Prevention Paint (Gallon)

Chassis Saver is a high solids, VOC compliant, single component chassis paint and underbody coating specially formulated to permanently stop automotive and truck corrosion without the use of primers or topcoats. Apply directly over tightly adhered rust after only marginal surface preparation using a wire brush and/or hand-scraper to remove loose scale and rust particulate. Optimum results can be achieved by sandblasting. Chassis Saver bonds to blasted and rusty metal to form a rock hard yet flexible, glaze-like, non-porous finish that won't crack, chip, flake or peel. Completely unaffected by road salt, gasoline, diesel fuel, oils, battery acids, hydraulic fluids, solvents, chemicals, or corrosives. 

Coverage: 350 to 400 sq. ft. per gallon approximately. Coverage will vary depending on surface profile, application technique and porosity of substrate. Material losses during mixing and application will vary and must be taken into consideration when estimating job requirements. Due to variations in application techniques and substrates, the approximated coverage is not guaranteed but only an estimate.

Recommended thickness: 2 mils minimum, up to 8 mils total